Chapter 4

Last Number Redial Call Forwarding-All Calls
Call Forwarding-Busy Call Forwarding-No Answer
Call Forwarding-Destination Save And Repeat A Number
Internal Zone Paging w/ Meet Me Page

LAST NUMBER REDIAL0-26-2

To recall the last number dialed:

  • Press Redial. Receive special dial tone.
  • 0-26-2Press #. The number dialed will be redialed and displayed.

NOTE:  Each time the Redial key is pressed the numbers dialed for the last five calls are displayed sequentially.

CALL FORWARDING-ALL CALLS

0-27-2To Set:

    • Press Speaker. Receive dial tone.
    • Press F-A or dial Call Forwarding access code.  Receive special dial tone.
    • Dial destination station or external telephone number. Receive service set tone.
    • FWD LED lights (at your station if FD-A key was used).
    • Press Speaker.  Call Forwarding for all calls is set.

0-27-2To verify (with 16 or 32-button Dterm):

  • Press Speaker.  Receive extension dial tone.

Press FD-A or dial Call Forward-All access code.

    • Display indicates the station number calls are forwarded to.

NOTE: If recipient station is a 16- or 32-button Dterm, LCD displays:

0-27-3To cancel:

  • Press Speaker. Receive dial tone.  Press FD-A plus * or dial Call Forwarding cancel code.  Receive service set tone.  LED goes out at your station  (or the Dterm of the
    sub line station).
  • Press Speaker.

0-28-1CALL FORWARDING­ BUSY

To set:

    • Press Speaker. Receive dial tone.
    • Press FD-B or dial Call Forwarding ­ Busy access code.  Receive special dial tone.
    • Dial destination station or external telephone number. Receive service set tone.
    • FD-B LED lights (at your station or at the Dterm of the sub line station you are setting).
    • Press Speaker. Call Forwarding Busy is set.

0-28-2To verify (with Display Phone):):

  • Press Speaker.  Receive dial tone.

Press FD-B or dial Call Forwarding ­ Busy access code.

    • Display indicates the station number calls are forwarded to.

NOTE: If recipient station is a 16 or 32-button Dterm, LCD displays:

0-27-3To cancel:

  • Press Speaker. Receive dial tone.
  • Press FD-B plus * or dial Call Forwarding ­ Busy cancel code.  Receive service set tone. LED goes out at your station.
  • Press Speaker. Call Forwarding is canceled.

0-28-1CALL FORWARDING -NO ANSWER

To set:

    • Press Speaker. Receive dial tone.
    • Press FD-N or dial Call Forwarding ­ No Answer access
      code. Receive special dial tone.
    • Dial destination station or external telephone number. Receive service set tone.
    • FD-ALED lights (at your station if FD-N key was used).
    • Press Speaker. Call Forwarding ­No Answer is set.

0-29-1To verify:

    • Press Speaker.  Receive extension dial tone.
    • Press FD-N or dial Call Forwarding-No Answer access code.
    • Display indicates destination number of call forward.

NOTE : Call Forwarding for Busy and No Answer may be combined  depending upon system programming.

0-28-1CALL FORWARDING ­ DESTINATION

    • Press Speaker. Receive dial tone.
    • Press FD-DS or dial Call Forwarding ­ Destination access code. Receive special dial tone.
  • Dial station number to be forwarded to this line. Wait for service set tone.
    • 0-27-3Press Speaker. Receive dial tone.
    • Press FD-DC or dial Call Forwarding ­ Destination cancel code.
  • Dial station
    number to cancel.
  • Press Speaker. Call Forwarding Destination is canceled.

TO SAVE AND REPEAT A NUMBER

To save

    • Press Speaker.
  • Dial desired telephone number.
  • Press S & R. Dialed number is now stored.  S & RLED lights.

To repeat

  • Press Speaker.
  • Press S & R. Dterm automatically redials the programmed number.
  • S & R automatically canceled. LED goes out.NOTE: If saved number is busy or no answer is received, to save it again,
    press
    S & R before hanging up.

INTERNAL ZONE PAGING WITH MEET-ME PAGE
This allows a system user to page over built-in speaker of Dterm terminal within the
assigned zone or all zones.

Example : Station A can page Station B. When Station B dials answer code, they are connected.

0-31-1To page (Station A)

  • Lift Handset. Receive dial tone.
  • Dial Internal Paging access code for the desired zone or all zones or press key assigned for desired zone or all zones.
  • Page Station B.
  • Remain off hook.

0-31-2To answer (Station B)

  • Station B dials Meet-Me answer code, and they are immediately
    connected.
    NOTE: Access to feature is based on data assignment.