Keys & Lamps

Function Keys Programmable Keys
Softkeys Lamps
Function Key Activities

Function Keys

Hold

Press key to place an internal or external call on hold.

Transfer

Allows the station user to transfer established calls to another station, without attendant assistance.

Answer

When LED on this key is lighted, press key to answer a waiting call.

Speaker

Controls the built-in speaker which can be used for Hands Free dialing/monitoring. LED on key lights when key is active.

Redial

Press key to activate redial feature. Press redial and scroll back through numbers that have been dialed, until the desired number is displayed. Press * to activate dialing.

Conf

Press key to establish a three-way conversation. LED on key lights when key is active.

Recall

Press key to terminate established call and reseize internal dial tone.

Feature

Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys.

UP/DOWN

Used to adjust LCD contrast, speaker/receiver volume, and ringer volume.

    • LCD Contrast:
      Press up or down key while idle.
    • Speaker/Receiver Volume:
      Press up or down key during conversation.
    • Ringer Volume:
      Press up or down key during ringing.

Programmable Keys

These are examples of Dterm features available by pressing the programmable keys. Some features may be programmed by the user. Others must be programmed by the telephone system administrator.

AICM (Automatic Intercom)

Press key to activate Automatic Intercom.

DATA

Press key to send or receive data calls, or to disconnect from a data call.

DICM (Dial Intercom)

Press key to activate Dial Intercom.

DND (Do Not Disturb)

Press key to activate or cancel Privacy feature.

FWD (Forward)

Press key to activate or cancel Call Forwarding – All Calls feature.

FWD-BY (Forward-Busy)

Press key to activate, verify, or cancel Call Forwarding – Busy feature.

FWD-NA (Forward-No Answer)

Press key to activate, verify, or cancel Call Forwarding – No Answer feature.

MICM (Manual Intercom)

Press key to activate Manual Intercom.

MSG (Message)

Press key to leave message indication at station in no answer or busy condition.

MW-SET (Message Waiting Set)

Press key to leave message waiting indication on boss’ station from secretary’s station.

MW-CANCEL (Message Waiting Cancel)

Press key to cancel message waiting indication on boss’ station from secretary’s station.

P-RLS (Privacy Release)

Press key to release Privacy feature.

S&R (Save and Repeat)

Press key to store a number or redial a stored number.

SIG (Signal)

Press key to cause chime at predetermined station.

SUBLINE APPEARANCE

A programmable extra extension key. Press key to see status of extra extension.

Soft Keysho-5-1

On Hook State (Telephone is idle)

 

ho-5-2Off Hook State (Telephone is in use)

Headset

Press the Soft Key below “HSET” to activate Headset operation. The primary extension LED will illuminate when headset is on.

Microphone

Press the Soft Key below “MIC” to activate or deactivate the Microphone. The MIC LED will illuminate when MIC is on.

Help

Press the Help Key. Press desired Soft Key for helpful information about that key.

Exit

Press the Exit Key to exit the Help program.

OHROFF (Off Hook Ringing Off)

Go off-hook or press Speaker Key, then press Soft Key below “OHR-ON” to disable ringing on secondary and trunk line appearances on this telephone while in use.

OHR-ON (Off Hook Ringing On)

Go off-hook or press Speaker Key, then press Soft Key below “OHROFF” to allow ringing on secondary and trunk line appearances on this telephone while in use.

MUTE

Go off-hook or press Speaker Key, then press Soft Key below “MUTE.” MUTE will flash and Voice Path is eliminated to the handset, headset or speaker.

Lamps

Call Indicator Lamp

Lamp at top of Dterm flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left.

LCD

Liquid Crystal Diode (LCD) display provides Dterm activity information plus date and time.

LED

Some function keys have a built-in Light Emitting Diode (LED) that lights or flashes according to the activity of that function key.

MIC (Microphone) Lamp

Lamp displays the status of the built-in microphone used for hands free operation.

Function Key Activities

FNC + 1 = Turns microphone on or off.

FNC + 2 = Adjusts handset receiver volume.

FNC + 3 = Selects ringer tone.

FNC + 4 = Adjusts transmission/receiving volume.

FNC + 5 = Activates hands-free operation.

FNC + 6 = Deactivates hands-free operation.

FNC + 7 = Turns call indicator lamp on or off for incoming call notification. (If turned off, this lamp will still light to indicate message waiting.)