Terminal Setup

Microphone On/Off Select Ringer Tone
Adjust Ringer Tone Preset Ringer Volume
Adjust Transmission/Receiving Volume

Microphone On/Off

The MIC lamp shows the status of the built-in microphone.

To change microphone status:

  • Press Soft Key associated with the MIC Display or press Feature and 1.

To select ringer tone4-7-3

The Dterm Series E has 3 kinds of ringer tones that you can select.

  • Press Feature and 3. The LCD displays the selected tone number (n=1 ~ 3).

 

Tone No.

                 Frequency(Hz)           Modulation(Hz)

1

480/606

16

2

480/606

8

3

1285/1024

16

4-7-3To adjust ringer tone

NOTE: Access to feature is based on data assignment.

  • Press Feature and 0. Ringer activates.
  • Press 3. The LCD displays the selected tone number (n=1~3).
  • 4-7-3Press 3. Next tone is selected.

To preset ringer volume

NOTE: Access to feature is based on data assignment.

  • Press Feature and 0. Ringer activates.
  • Press down or up Key. Ringer volume decreases or increases.
  • Press Feature Key to stop ringing.

To adjust transmission/receiving volume (During valid call)

  • Press Feature and 4. The Transmit Volume increases.
  • Press Feature and 4 again. Transmit Volume returns to normal.
  • Press down or up. Receive Volume decreases or increases.