|Function Keys||Programmable Keys|
|Feature Key Activities|
Press key to place an internal or external call on hold.
Allows the station user to transfer established calls to another station, without attendant assistance.
When LED on this key is lighted, press key to answer a waiting call.
Controls the built-in speaker which can be used for Hands Free dialing/monitoring. LED on key lights when key is active.
Press key to activate redial feature. Press redial and scroll back through numbers that have been dialed. Until the desired number is displayed. Press the * key to activate dialing.
Press key to establish a three-way conversation. LED on key lights when key is active.
Press key to terminate established call and reseize internal dial tone.
Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys.
Used to adjust LCD contrast, speaker/receiver volume, and ringer volume.
Press up or down key while idle.
Press up or down key during conversation.
Press up or down key during ringing.
These are examples of Dterm® features available by pressing the programmable keys. Some features may be programmed by the user. Others must be programmed by the telephone system administrator.
Press key to activate Automatic Intercom.
Press key to send or receive data calls, or to disconnect from a data call.
Press key to activate Dial Intercom.
DND (Do Not Disturb)
Press key to activate or cancel Privacy feature.
Press key to activate or cancel Call Forwarding – All Calls feature.
Press key to activate, verify, or cancel Call Forwarding – Busy feature.
Press key to activate, verify, or cancel Call Forwarding – No Answer feature.
Press key to activate Manual Intercom.
Press key to leave message indication at station in no answer or busy condition.
Press key to leave message waiting indication on boss’ station from secretary’s station.
Press key to cancel message waiting indication on boss’ station from secretary’s station.
Press key to release Privacy feature.
S&R (Save and Repeat)
Press key to store a number or redial a stored number.
Press key to cause chime at predetermined station.
SUB LINE APPEARANCE
A programmable extra extension key. Press key to see status of extra extension.
(Telephone is idle)
Off Hook State
(Telephone is in use)
Press the Soft Key below “Headset” to activate Headset operation. The primary extension LED will illuminate when headset is on.
Press the Soft Key below “Mic” to activate or deactivate the Microphone. The Mic LED will illuminate when Mic is on.
Press the Help Key. Press desired Soft Key for helpful information about that key.
Press the Exit Key to exit the Help program.
OHROFF (Off Hook Ringing Off)
Go off-hook or press Speaker Key, then press Soft Key below “OHROFF” to disable ringing on secondary and trunk line appearances on this telephone while in use.
OHR-ON (Off Hook Ringing On)
Go off-hook or press Speaker Key, then press Soft Key below “OHR-ON” to allow ringing on secondary and trunk line appearances on this telephone while in use.
Go off-hook or press Speaker Key, then press Soft Key below “MUTE”. MUTE will flash and Voice Path is eliminated to the handset, headset or speaker.
Liquid Crystal Diode (LCD) display provides Dterm activity information plus date, time and Soft Key operation.
Some function keys have a built-in Light Emitting Diode (LED) that lights or flashes according to the activity of that function key.
MIC (Microphone) Lamp
Lamp displays the status of the built-in microphone used for hands free operation.
Feature + 1 = Turns microphone on or off.
Feature + 2 = Adjusts handset receiver volume.
Feature + 3 = Selects ringer tone.
Feature + 4 = Adjusts transmission/receiving volume.
Feature + 5 = Activates hands-free operation.
Feature + 6 = Deactivates hands-free operation.
Feature + 7 = Turns call indicator lamp on or off for incoming call Notification.
(If turned off, this lamp will still light to indicate message waiting.)