Chapter 6

Maid Status Direct Page Connection
Audit Report Do Not Disturb
Direct Paging Message Waiting

MAID STATUS

    • Press STS; the associated lamp illuminates.
    • Dial the guest station number. The console displays the guest station number.
    • Press ENTER; the STS lamp flashes. The console displays the status of the guest room.
    • Press STS; the associated lamp illuminates. The most recent maid status information is displayed.
    • To change the Maid Status information, dial the desired status code (1-9); the new status is displayed.
    • Press ENTER. The STS lamp flashes for confirmation.
    • Press EXIT. The lamp is extinguished.

AUDIT REPORT

    • Press AUD. The associated lamp illuminates.
    • Press STS.
    • Dial the desired function code. The console displays the function code.
    • Press ENTER. Lamps are extinguished and the report printout begins.

DIRECT PAGING

    • Press PAGE.
    • Page the desired party.

DIRECT PAGE CONNECTION

An Incoming Call on a Loop Requires Paging

      • Press HOLD.
      • Press and hold down the PAGE key while paging the desired party.

For Connection After Paged Party Answer at Console

    • Press the held LOOP key.
    • Press TALK to establish a three-way conference between the paged party, the held party and the console.
    • Press RELEASE to connect the paged party and the held party immediately.

DO NOT DISTURB

To Set

      • Press the DDS key; the lamp illuminates.
      • Dial the guest station number; the console displays the guest station number.
      • Press ENTER. The DDS lamp flashes.
      • Press EXIT. The lamp is extinguished.

To Cancel

    • Press the DDR key; the lamp illuminates.
    • Dial the guest station number; the console displays the guest room number.
    • Press ENTER. The DDR lamp flashes.
    • Press EXIT. The lamp is extinguished.

MESSAGE WAITING

To Set

      • Press the MWS key; the associated lamp illuminates.
      • Dial the guest station number; the console displays the guest station number.
      • Press ENTER. The MWR lamp flashes.
      • Press EXIT. The lamp is extinguished.

To Cancel

    • Press the MWR key; the lamp illuminates.
    • Dial the guest station number; the console displays the guest station number.
    • Press ENTER. The MWR lamp flashes.
    • Press EXIT. The lamp is extinguished.