Chapter 4

External Paging External Paging With Meet Me
Serial Call Message Waiting From Console
Position Busy Night Connection
Appendix

EXTERNAL PAGING

To Page without an Incoming Call

  •  Press an idle LOOP key.
  •  Dial External Paging Access Code.
  •  Page the desired party.
  •  Press RELEASE or CANCEL key.

NOTE : External Paging is an optional feature. Check with your system administrator to determine if this feature is configured in your system.

EXTERNAL PAGING WITH MEET ME

  •  Answer an incoming call.
  •  Press HOLD key.
  •  Press an idle LOOP key.
  •  Dial paging access code, receive 1 second of ringback tone.
  •  Page the desired party.

When Paged Party Dials Answer Code

  •  Answer call ringing on ATND key; call in now on a LOOP key.
  •  Announce Caller.
  •  Press LOOP key of held outside call.
  •  Press RELEASE or CANCEL key.

NOTE: External Paging with Meet Me is an optional feature. Check with your system administrator to determine if this feature is configured in your system.

SERIAL CALL

  •  Press ANSWER or LCN key to answer incoming Central Office call.
  •  Calling Party request to speak with two or more stations sequentially.
  •  Dial the first internal station number.
  •  Press the SC key (instead of RELEASE key).
  •  When the first called station hangs up, an audible tone is heard and ANSWER key Flashes red.
  •  Press ANSWER key to return to calling party.
  •  Dial the second internal station number and press the SC key.
  •  Repeat this operation as many times as calling party requires.
  •  Use RELEASE key (instead of SC key) after extending call to final destination.

NOTE: Serial Call is an optional feature. Check with your system administrator to determine if this feature is configured in your system.

MESSAGE WAITING FROM CONSOLE

To Set

  •  Press an idle LOOP.
  •  Dial Message Waiting Set code and receive Special Dial Tone.
  •  Dial internal station number and receive Service Set Tone.
  •  Press RELEASE.

To Cancel

  •  Press an idle LOOP.
  •  Dial Message Waiting Cancel code and receive Special Dial Tone.
  •  Dial internal station number and receive Service Set Tone.
  •  Press RELEASE.

NOTE: If called station already has a message, the console will receive reorder tone and Cancel must be pressed.

POSITION BUSY
(For Lunch, Breaks, etc.)

To Set

  •  Press POSITION BUSY.
  •  POSITION BUSY lamp will be lit and POSITION AVAILABLE lamp will be off.

To Cancel

  •  Press POSITION BUSY.
  •  POSITION BUSY lamp will be off and POSITION AVAILABLE lamp will be lit.

NIGHT CONNECTION
(For Activation of Night Features at close of business day)

To Activate

  •  Press NIGHT.
  •  NIGHT lamp will be lit.

To Cancel

  •  Press NIGHT.
  •  NIGHT lamp will be off.

NOTE: Night features may or may not be configured in your system. Check with your system administrator for details.

Appendix

To Set Up the Desk Console for HANDSET Use

  •  Disconnect the line cord from the SN716 Desk Console.
  •  Press loop keys L3 and L6 simultaneously.
  •  The following menu displays on the LCD. Reconnect the line cord to the console.
  •  Press 1 for HEADSET/HANDSET setup.
  •  The following menu displays:
  •  Press 2 to specify HANDSET.
  •  Press SRC to return to the CONFIG MENU (shown below).
  •  Press ANSWER to update.
  •  Press RELEASE to exit.