Terminal Setup

Microphone On/Off Adjust Transmission / Receiving Volume
Adjust Initial Receiving Volume Activate Hands-Free
Select Ringer Tone Call Indicator Lamp On/Off

MICROPHONE ON/OFF

The MIC lamp shows the status of the built-in microphone.

To change microphone status:

  •  Press Soft Key associated with the MIC Display or press Feature and 1.

TO ADJUST INITIAL RECEIVING VOLUME4-7-1

Handset receiver volume can be changed.

To change the handset receiver volume:

 

    •  Press Feature and 2. The LCD displays the current volume.

4-7-3


  •  Press Feature and 2 to alternate between Small and Large volume.

4-7-3TO SELECT RINGER TONE

The Dterm Series E has 4 kinds of ringer tones that you can select.

  •  Press Feature and 3. The LCD displays the selected tone number (n=1 ~ 4).

Tone No.

Frequency

(Hz)

Modulation

(Hz)

1

480/606

16

2

480/606

8

3

1285/1024

16

4

600/700

16

4-8-1TO ADJUST TRANSMISION RECEIBING VOLUME

Handset volume can be changed permanently. NEC027illus 1

  • 4-8-2 Press Feature and 4. The LCD displays the current volume. 
  •  Press Feature and 4. again to alternate between Small and Large volume.

TO ACTIVATE HANDS-FREE

4-8-3To set hands-free on:

  •  Press Feature and 5. The LCD displays:

4-8-4To set hands-free off:

  •  Press Feature and 6. The LCD displays:

4-8-5CALL INDICATOR LAMP ON/OFF4-8-5

The user can choose to turn the call indicator lamp either on or off
during ringing.

  • 4-8-6Press Feature and 7. The LCD displays:

NOTE: The call indicator lamp lights when used as a Message Waiting Lamp, even when it is turned off by the above operation.